Installation and Configuration of Ghostscript

From Scribus Wiki
Revision as of 02:31, 23 July 2010 by Gpittman (Talk | contribs)

Jump to: navigation, search

Ghostscript is needed by Scribus for two purposes, namely the print preview (File > Print Preview) and the rasterisation of EPS files in image frames. If you don't need one of those features, you can safely ignore the warning message displayed by Scribus in case Ghostscript isn't installed.

Contrary to some reports in the press, Ghostscript is not required for PDF or EPS export, since Scribus has its own code to handle this feature.

Recommended/required Ghostscript versions

Generally speaking, you want to have the latest ghostscript you can find. You should find anything since 8.60 to be serviceable, but as of this writing the current version is 8.71. As far as we know, you cannot go wrong by potentially having some "too far advanced" version of Ghostscript.

Installing Ghostscript as a binary on Linux/UNIX

This is by far the most sensible way. Most of the "mainstream" Linux distros will have Ghostscript in their repositories, so if you don't have it, simply search for it. If you don't know how to work with your repositories, you might as well forget about Ghostscript, since you have or are going to have far more important issues than that.

A particular advantage of the repository method is that once you install it, it will keep itself up to date.

Building Ghostscript from source on Linux/UNIX

Download the latest tarball

Ok, so let's imagine you want your own custom-built Ghostscript, or you're using some flavor of Linux that you're experimenting with that doesn't have repositories.

Go here: http://pages.cs.wisc.edu/~ghost/

where you can find links to whichever version you want to build. What you see there are 3 choices, ending with .tar.gz, .tar.xz, or .tar.bz2. You only need to choose one of these. The tar part means that the file was tarred, in which a number of files are collected together into one file. The other part, gz, xz, or bz2 means the file was then compressed to shrink its size.

Please Note

About checksums:

It's always a good idea to check the validity of anything like this that you download. If nothing else, there may have been an error occur, which leads to a failed compiling and wastes your time. Once you download your file, you can run a checksum on it, which makes a calculation on the contents of the file, then creates an alphanumeric sequence that should match whichever checksum corresponds to your file from the list.

Again, you should have these in your system, either the sha1sum or md5sum utilities ends up with the corresponding result:

sha1sum filename.tar.gz (for example)

or

md5sum filename.tar.gz

should produce the sequence you see. If not, something went wrong with the download or the file has been tampered with.

You have to have the tar utility, almost certain with Linux whether you realize it or not. In a console of some sort type:

tar -zxvf filename.tar.gz

or

tar -Jxvf filename.tar.xz

or

tar -jxvf filename.tar.bz2

depending on which one you downloaded. The z or the J or the j option uncompresses the file so that then it can be extracted with the x option. The v and f options cause verbose output and indicate that what follows is a filename of the archive.

What you should now have is a directory named ghostscript-8.71. Now,

cd ghostscript-8.71 to enter the directory

then run

./configure

next

make

After make finishes its work, then you run, as root:

make install

on some systems you can become root by running su and then supplying root's password. On others, you might run sudo make install in which case you supply your own password if you have privileges to run sudo.

Installing Ghostscript on Windows

Download resources

Go here: http://pages.cs.wisc.edu/~ghost/

We're going to assume that you have no interest in compiling on Windows, or that if you did you would not need instructions for the process.

If you go farther down the page, past the archived files, past the checksums, you will find links for 32-bit and 64-bit Windows versions. Simply download these files and run them to install Ghostscript. If you do this before you install Scribus, chances are Scribus will find Ghostscript unless you choose a nonstandard location when Ghostscript was installed.

If it doesn't, go to File > Preferences > External Tools to browse for your Ghostscript executable. Remember to choose the gswin32c.exe or gswin64c.exe executable depending on your processor's version of Windows.

Installing Ghostscript on Mac OS X

MacPorts

Ghostscript DMGs

The short path to Mac dmgs seems to be this one:

http://www.uoregon.edu/~koch/

Read the About Ghostscript 8.71 file to get a sense of what is included, which is different versions for whatever recent MacOS version you might have.

Building from source

Installing Ghostscript on OS/2 and eComStation

Download resources

Installation

Enabling Scribus to use Ghostscript

Ghostscript and fonts