Git: Difference between revisions

From Scribus Wiki
Jump to navigation Jump to search
Line 215: Line 215:
Explanations : remove current change (because a merge was allredy tempted), then fetch original repo, go on this repo (without branch), create a fake branch (lala) and then remove this branch to call is : unitLoader
Explanations : remove current change (because a merge was allredy tempted), then fetch original repo, go on this repo (without branch), create a fake branch (lala) and then remove this branch to call is : unitLoader


== neither GIT not SVN but Scribus too ==
== Neither GIT not SVN but Scribus too ==


* https://bitbucket.org/balpha/scribus-patches/wiki/Home : set of patches to enhance scribus, with a Mercurial repo.
* https://bitbucket.org/balpha/scribus-patches/wiki/Home : set of patches to enhance scribus, with a Mercurial repo.

Revision as of 15:26, 13 December 2013

This page provides documentation for the usage of Scribus Git repositories for Scribus development.

Introduction

Scribus Team maintains two code repositories - an internal protected Subversion repository accessible to only experienced core developers that contains a pristine history of Scribus development and a newer Git repository (several of them actually) that enable the Worldwide Scribus Community to easily contribute code to Scribus. We are attempting to follow the successful Git branching development model for the Git repository as explained below.

Definition for git commands can be found on http://git-scm.com/docs .

Scribus Git Repositories

The full list of Scribus code Git repositories:

  • scribus

This is the main Scribus git repository with the complete history. This is where the developmental code written by the members of the Scribus Community happens. Please clone the repository and branch from the "master" branch to do your development, then push your branch to the repository for others to fetch.
It contains different branches:

   * master - mirror of the main development branch. Do not push directly to this branch, but issue a pull request in #scribus or in the BTS.
   * trunk - branch synchronized with the Subversion trunk. Contains the contributors branches.

There can be some short lived feature branches there as well that may disappear at any time once merged into the master branch. For instance at this time there are:

   * footnotes - Adding Footnotes by cezaryece. Now merged into svn trunk, and git branch is dead.
   * autoheight - Work on the Frame auto-height by cezaryece.
   * statusbar - work on the statusbar by ale
   * epub and epub_modular : work on epub exporter by ale
   * numeration : work on paragraph effects like bullets, dropcaps and enumeration by cezariece. Now merged into the svn trunk.
   * imposer : work on PDF imposer by Foske
   * indic : work on indic text by Anil (see http://wiki.scribus.net/canvas/Complex_Script_Functionality)
  • trunk - Repository for synchronization with the Subversion trunk. This is a read-only repository. It is used to provide current Scribus subversion/trunk code for Git users.
  • testing - empty repository to practice and learn git. All members of the Scribus community are welcome to use it as needed. There is no guarantee that the changes will stay as another user can delete them just as easily as they are created.

GSoC 2012 Student repositories:

  • gsoc12pm - Project Manager project repository.
  • gsoc12ux - User Experience project repository.
  • gsoc12xml - New XML File Format project repository.
  • gsoc12trunk - Merge and synchronization repository for GSoC 2012 (unused)

The GSoC repositories are writable by the students and their mentors, but are also available as read-only repositories for anyone else using the "Public Access" method described below.

Using Scribus Git Repositories

Bases for Public Access

Public read-only access to all git repositories is available. For instance, to clone locally the trunk use the git clone git://git.scribus.net/trunk.git command. It will create a local repository from a copy of the at the time distant repo.

Note : after installing git, the whole procedure is as follows. Real commands to follow are marked with a dot, other lines are examples.

 git clone git://git.scribus.net/scribus.git
If you want to clone into a scribus.git folder the command is
 git clone git://git.scribus.net/scribus.git scribus.git
For ScribusECE repository (http://www.scribus-ece.info = cezaryece's scribus enhanced version), you'll create a local copy of the repo in the 'ece' folder using the following command :
 git clone git://scribus-ece.info/ScribusECE ece
List local branches. See: current is *master. (see http://git-scm.com/docs/git-branch for options details)
 git branch
List all remote branches (notice the branch are labelled with an 'origin/' prefix)
 git branch -r
List all branches on the repo (local AND remote) :
 git branch -a
 git checkout -b --track footnotes origin/footnotes

Rq : Sometime it seems that simply

 git checkout footnotes

works better.

list all local branches ( current is now *footnotes, other is master) :
 git branch
Change local active branch to master for example.
 git checkout master
Update 'master' branch
 git pull
Set local active branch back to 'footnotes'
 git checkout footnotes
Update local 'footnotes' branch
 git pull
  • Compile as usual, but stating a dedicated destination folder. for example :
 cd Scribus
 mkdir build
 cd build
 cmake -DCMAKE_INSTALL_PREFIX:PATH=~/bin/scribusfootnotes -DWANT_DEBUG=1 -DWANT_GUI_LANG="fr" -DWANT_SYSTEM_CAIRO=1 ..
 make -j4
 sudo make install
 sudo ln -s ~/bin/scribusfootnotes/bin/scribus /usr/bin/scribusfootnotes
  • Pour ensuite actualiser localement le code afin de suivre les commits distants :
 git pull

Write Access

Read the Set up SSH Keys section to learn about creating an acceptable ssh key. On Linux, your public ssh key can then be found in "~/.ssh/id_rsa.pub".

To obtain write access please email your public ssh key to admin@scribus.net or post it somewhere on the web and email or paste the link into #scribus IRC channel (and ask Malex to find it !).

Once we accept your key you will be able to verify your access with a ssh git@git.scribus.net info command.

If you have access gitolite will greet you and show the list of repositories accessible to you. After that, you can clone a repository via, for example, git clone git@scribus.net:scribus.git and be able to push back your commits if allowed.

(AS OF NOW THIS MIGHT BE DIFFERENT) The application of the Git Branching and Merging development model to Scribus development includes :

  • Using scribus.git repository for community development.
  • Using the following naming scheme for the branches:
    • master - main developmental branch - merge your feature/fix branches into it.
    • release - release / tagging branch.
    • trunk - used to synchronize code to and from the git-svn trunk.git repository.
    • YOURBRANCH - branch master and develop new features or fix problems before merging into master.

Updating a branch

So as to synchronise your local repo with the distant one, you have to pull :

 git pull

if you only want to checkout footnotes branc, you might try :

 git pull origin footnotes

In case you have modified local repo, its not possible anymore to pull. In such a situation, git status tells what files are changed in the local repo. You can then revert file to state from remote repo with :

 git checkout remote/repo -- file

Good git diffs & svn patchs

How to create a good diff

This still has to be defined.

How to apply a diff

This still has to be documented. Begin !


SVN vs GIT diffs

Ch: The only difference between git diff file and svn diff file is that you have to use patch -p1 instead of patch -p0 to apply them.

Cz : The trick with diffs from git is to use : --no-prefix switch

 git diff --no-prefix remote/branch my_branch

and I am always using trunk/svn as remote for diff and now diff file is working with

 #patch -l -p0 < file.diff
Patch for windows OS (to be further explored)

To sum it up : how to get and compile a specific branch : indic of scribus.git

In case you want to build another branch of scribus.git, replace indic with the name of the branch in all occurences.

In case the branch you want to build is another repo, replace scribus.git with the name of the repo.

The build is done quicker using the -DWANT_GUI_LANG="en" option for the cmake command. If you want a french-only interface instead of an english-only, use -DWANT_GUI_LANG="fr". If you want access to all langages in the interface, juste dont take that option out of the cmake command (but building time will be much longer).

cd ~
mkdir dev
cd dev
mkdir scribus
cd scribus
git clone git://git.scribus.net/scribus.git scribus.git
cd scribus.git
git checkout indic
git pull
cd Scribus
mkdir buildindic
cd buildindic
mkdir ~/bin
mkdir ~/bin/scribusindic
cmake -DCMAKE_INSTALL_PREFIX:PATH=~/bin/scribusindic -DWANT_DEBUG=1 -DWANT_GUI_LANG="en" -DWANT_SYSTEM_CAIRO=1 ..
make -j4
sudo make install
sudo ln -s ~/bin/scribusindic/bin/scribus /usr/bin/scribusindic

In case you got missing libraries error, here is how you should get them all :

sudo apt-get build-dep scribus
sudo apt-get install libqtwebkit4 libqtwebkit-dev
sudo apt-get install libicu48 libicu-dev
sudo apt-get install git

Tools for GIT

On linux, there are plenty of tools. Just to name a few :

  • rabbitvcs provides a nautilus extension a bit like tortoise tools
  • gitg enables to view nicely the branch trees, to easily browse across the branches and to view each commit details.
  • QGit does the same but doesnt look so friendly.

Fewer tools are available for windows : msysgit

Literature on using Git

There are numerous Git tutorials on the web.

These 2 make a very nice couple to start with too :


See also :

En français :

Urgency Tricks

  • If you have edited local changes and maybe tried to merge and couldnt because of conflicts, here is a way to localy recover git repo version of a 'unitLoader' branch (you will loose local changes ) :
 git fetch && git checkout -f -B thebranch origin/thebranch

if it's not ok (because of whatever conflict or history issue), this should sort out the issue :

 git reset --hard HEAD && git fetch && git checkout origin/unitLoader && git checkout -b lala && git branch -M unitLoader

Explanations : remove current change (because a merge was allredy tempted), then fetch original repo, go on this repo (without branch), create a fake branch (lala) and then remove this branch to call is : unitLoader

Neither GIT not SVN but Scribus too