Infobox in column: Difference between revisions

From Scribus Wiki
Jump to navigation Jump to search
 
(5 intermediate revisions by the same user not shown)
Line 117: Line 117:


===Enhanced Version===
===Enhanced Version===
For reasons not completely clear, it became necessary to remove the parts referring to the Python Imaging Library. What this means is that you will not get an automatic sizing of the frame vertically.
This version does not use Python Imaging Library. What this means is that you will not get an automatic sizing of the frame vertically. See the next version below this one for that capability.
{|width=90%
{|width=90%
|valign=top|Requirements:
|valign=top|Requirements:
Line 127: Line 127:
* Which column to start in
* Which column to start in
** If there is only one column this is also skipped
** If there is only one column this is also skipped
* What height you wish the infobox to be – default is entire height of selected frame. If you are going to load an image, the height is now adjusted automatically (see below).
* What height you wish the infobox to be – default is entire height of selected frame.
* Where you want the top of infobox to be – default is top of selected frame
* Where you want the top of infobox to be – default is top of selected frame
* Now you are presented with a default name for the infobox, which you can change
* Now you are presented with a default name for the infobox, which you can change
Line 137: Line 137:
* At this point, infobox is created and script ends
* At this point, infobox is created and script ends
* Since the frame is not automatically sized vertically, you will need to adjust this after the frame with image is created.
* Since the frame is not automatically sized vertically, you will need to adjust this after the frame with image is created.
** If you have estimated a height too great for the image, right-click and choose Adjust Frame to Image.
** If you have estimated a height too short for the image to fit the entire width, use the frame handles to stretch the frame vertically, then use Adjust Frame to Image.
* You can run this script again on the same selected frame
* You can run this script again on the same selected frame


Line 147: Line 149:


===InfoBox.py===
===InfoBox.py===
<pre>
(Version for 1.3.3.x series &ndash; see note above)
<syntaxhighlight lang=python>
#!/usr/bin/env python
#!/usr/bin/env python
# -*- coding: utf-8  -*-
# -*- coding: utf-8  -*-
Line 305: Line 308:
             pass
             pass


</pre>
</syntaxhighlight>


Here is the version using the Python Imaging Library. If someone can figure out why it's broken (freezes when PIL gets invoked), let us know.
Here is the version using the Python Imaging Library.


<pre>
<syntaxhighlight lang=python>
#!/usr/bin/env python
#!/usr/bin/env python
# -*- coding: utf-8  -*-
# -*- coding: utf-8  -*-
Line 470: Line 473:
             pass
             pass


</pre>
</syntaxhighlight>

Latest revision as of 01:18, 19 November 2016

This article is part of the Scripts series.

Original Version

#!/usr/bin/env python
# -*- coding: utf-8  -*-

# ****************************************************************************
#  This program is free software; you can redistribute it and/or modify 
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# 
# ****************************************************************************


"""
(C) 2005 by Thomas R. Koll, <tomk32@gmx.de>, http://verlag.tomk32.de

A simple script for exact placment of a textbox (infobox)
over the current textbox, asking the user for the width
of the infobox and in which column to place it.
I normally use it for a table-like box above the regular text.

USAGE
Select a textframe, start the script and have phun
Default name for the infobox is 'infobox' + name_of_selected_frame

TODO
* ask for height
* ask for name
* ask for content?

"""

import sys
import re
import string

try:
    from scribus import *
except ImportError:
    print "Unable to import the 'scribus' module. This script will only run within"
    print "the Python interpreter embedded in Scribus. Try Script->Execute Script."
    sys.exit(1)

def main(argv):
    unit = getUnit()
    setUnit(UNIT_MILLIMETERS)
    if selectionCount() == 0:
        messageBox('Scribus - Script Error',
            "There is no object selected.\nPlease select a text frame and try again.",
            ICON_WARNING, BUTTON_OK)
        sys.exit(2)
    try:
        textbox = getSelectedObject()
        left, top = getPosition(textbox)
        o_width, o_height = getSize(textbox)
        o_cols = int(getColumns(textbox))
        o_gap = getColumnGap(textbox)
    except:
        messageBox('Scribus - Script Error', 
             "Can't get size of object, maybe not a textframe", ICON_WARNING, BUTTON_OK)
        sys.exit(2)
    columns_width = 1
    column_pos = 0
    o_colwidth = (o_width - ((o_cols - 1) * o_gap)) / o_cols
    if (o_cols > 1):
        while (columns_width > o_cols or columns_width < 1):
            columns_width = valueDialog('Width',
                                            'How many columns width shall the '+
                                            'box be (max ' + str(o_cols) + ')?')
            columns_width = int(columns_width)
        if (columns_width < o_cols):
            max = o_cols - columns_width
            while (column_pos <= max and column_pos <= 1):
                column_pos = valueDialog('Placement',
                                         'In which column do you want '
                                         'to place the box (1 to ' +
                                         str(o_cols) + ')?')
            column_pos = int(column_pos) - 1 
    new_width = columns_width * o_colwidth + (columns_width-1) * o_gap
    new_left = left + ((column_pos) * o_colwidth) + ((column_pos) * o_gap)
    new_textbox = createText(new_left, top, new_width, o_height,
                             "infobox " + textbox)
    setColumnGap(0, new_textbox)
    setColumns(1, new_textbox)
    setUnit(unit)

if __name__ == '__main__':
    # This script makes no sense without a document open
    if not haveDoc():
        messageBox('Scribus - Script Error', "No document open", ICON_WARNING, BUTTON_OK)
        sys.exit(1)
    # Disable redraws
    setRedraw(False)
    # Run the main script, ensuring redraws are re-enabled even if the
    # script aborts with an exception, and don't fail with an exception
    # even if the document is closed while the script runs.
    try:
        main(sys.argv)
    finally:
        try:
            setRedraw(True)
        except:
            pass

Enhanced Version

This version does not use Python Imaging Library. What this means is that you will not get an automatic sizing of the frame vertically. See the next version below this one for that capability.

Requirements:
  • You have to run this in Scribus
  • You must have a document open, with a text frame selected

After the script analyzes the frame, you then indicate via dialogs:

  • How many columns you wish the infobox to spread across
    • If there is only one column this is skipped
  • Which column to start in
    • If there is only one column this is also skipped
  • What height you wish the infobox to be – default is entire height of selected frame.
  • Where you want the top of infobox to be – default is top of selected frame
  • Now you are presented with a default name for the infobox, which you can change
  • Next you select Frame Type
    • 'text' for text frame (no quotes) – this is the default
    • 'imageL' for image frame and file dialog to load image
      • The open file dialog now also looks for capitalized versions of file suffixes, like .JPG and .PNG
    • anything else (including blank) for empty image frame
  • At this point, infobox is created and script ends
  • Since the frame is not automatically sized vertically, you will need to adjust this after the frame with image is created.
    • If you have estimated a height too great for the image, right-click and choose Adjust Frame to Image.
    • If you have estimated a height too short for the image to fit the entire width, use the frame handles to stretch the frame vertically, then use Adjust Frame to Image.
  • You can run this script again on the same selected frame

This script will also work with 1.3.5+ versions of Scribus, but you must change the textFlowsAroundFrame command to textFlowMode since the name of this was changed – there are two instances of this in the script.

This illustrates two successive runs of the program, creating one image infobox, one text infobox.
Text was subsequently added to the text infobox.

InfoBox.py

(Version for 1.3.3.x series – see note above) 

#!/usr/bin/env python
# -*- coding: utf-8  -*-

# ****************************************************************************
#  This program is free software; you can redistribute it and/or modify 
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# 
# ****************************************************************************


"""
(C) 2005 by Thomas R. Koll, <tomk32@gmx.de>, http://verlag.tomk32.de

(c) 2008, 2010 modifications, additional features, and some repair
    by Gregory Pittman

A simple script for exact placement of a frame (infobox)
over the current textbox, asking the user for the width
of the infobox and in which column to place it.

Some enhancements:<br>
* You can now create a text frame or an image frame, and also load
an image.<br>
* More than one infobox can be added to a text frame by repeatedly running
  the script (ie, no name conflicts occur).<br>
* Height and Y-Pos of top of infobox can be specified.<br>
* Works with any page unit - pts, mm, in, and picas, cm, and even ciceros.<br>
* Infobox has Text Flows Around Frame activated, also
  Scale Image to Frame for images.

USAGE<br>
Select a textframe, start the script and have phun
Default name for the infobox is 'infobox' + name_of_selected_frame,
but this can be changed.


"""

try:
    import scribus
except ImportError:
    print "Unable to import the 'scribus' module. This script will only run within"
    print "the Python interpreter embedded in Scribus. Try Script->Execute Script."
    sys.exit(1)

def main(argv):
    unit = scribus.getUnit()
    units = [' pts','mm',' inches',' picas','cm',' ciceros']
    unitlabel = units[unit]
    if scribus.selectionCount() == 0:
        scribus.messageBox('Scribus - Script Error',
            "There is no object selected.\nPlease select a text frame and try again.",
            scribus.ICON_WARNING, scribus.BUTTON_OK)
        sys.exit(2)
    if scribus.selectionCount() > 1:
        scribus.messageBox('Scribus - Script Error',
            "You have more than one object selected.\nPlease select one text frame and try again.",
            scribus.ICON_WARNING, scribus.BUTTON_OK)
        sys.exit(2)
    textbox = scribus.getSelectedObject()
    pageitems = scribus.getPageItems()
    boxcount = 1
    for item in pageitems:
        if (item[0] == textbox):
            if (item[1] != 4):
                scribus.messageBox('Scribus - Script Error', 
                          "This is not a textframe. Try again.", scribus.ICON_WARNING, scribus.BUTTON_OK)
                sys.exit(2)

# While we're finding out what kind of frame is selected, we'll also make sure we
# will come up with a unique name for our infobox frame - it's possible we may want
# more than one for a multicolumn frame.
        if (item[0] == ("infobox" + str(boxcount) + textbox)):
                boxcount += 1
    left, top = scribus.getPosition(textbox)
    o_width, o_height = scribus.getSize(textbox)
    o_cols = int(scribus.getColumns(textbox))
    o_gap = scribus.getColumnGap(textbox)
            
    columns_width = 0
    column_pos = 0
    o_colwidth = (o_width - ((o_cols - 1) * o_gap)) / o_cols
    if (o_cols > 1):
        while (columns_width > o_cols or columns_width < 1):
            columns_width = scribus.valueDialog('Width',
                                            'How many columns width shall the '+
                                            'box be (max ' + str(o_cols) + ')?','1')
            columns_width = int(columns_width)
        if (columns_width < o_cols):
            max = o_cols - columns_width
            while (column_pos <= max and column_pos <= 1):
                column_pos = scribus.valueDialog('Placement',
                                         'In which column do you want '
                                         'to place the box (1 to ' +
                                         str(o_cols) + ')?','1')
            column_pos = int(column_pos) - 1 
    if (o_cols == 1):
	columns_width = 1
    new_height = 0
    while (new_height == 0):
        new_height = scribus.valueDialog('Height','Your frame height is '+ str(o_height) +
                                                 unitlabel +'. How tall\n do you want your ' +
                                                 'infobox to be in '+ unitlabel +'?\n If you load an image, height will be\n calculated, so the value here does not\n matter.', str(o_height))
    new_top = -1
    while (new_top < 0):
        new_top = scribus.valueDialog('Y-Pos','The top of your infobox is currently\n'+ str(top) +
                                                 unitlabel +'. Where do you want \n' +
                                                 'the top to be in '+ unitlabel +'?', str(top))
    framename = scribus.valueDialog('Name of Frame','Name your frame or use this default name',"infobox" + str(boxcount) + textbox)
    frametype = 'text'
    frametype = scribus.valueDialog('Frame Type','Change to anything other\n than "text" for image frame.\nEnter "imageL" to also load an image',frametype)
    new_width = columns_width * o_colwidth + (columns_width-1) * o_gap
    new_left = left + ((column_pos) * o_colwidth) + ((column_pos) * o_gap)
    if (frametype == 'text'):
        new_textbox = scribus.createText(new_left, float(new_top), new_width, float(new_height),framename)
        scribus.setColumnGap(0, new_textbox)
        scribus.setColumns(1, new_textbox)
        scribus.textFlowsAroundFrame(new_textbox, 1)
    else:
        if (frametype == 'imageL'):
	    imageload = scribus.fileDialog('Load image','Images(*.jpg *.png *.tif *.JPG *.PNG *.jpeg *.JPEG *.TIF)',haspreview=1)
	    new_image = scribus.createImage(new_left, float(new_top), new_width, float(new_height),framename)
	    scribus.loadImage(imageload, new_image)
            scribus.messageBox('Please Note',"Your frame will be created once you click OK.\n\nUse the Context Menu to Adjust Frame to Image.\n\nIf your image does not fill the width completely,\nstretch the frame vertically first.",scribus.BUTTON_OK)
        else:
	    new_image = scribus.createImage(new_left, float(new_top), new_width, float(new_height),framename)
        scribus.textFlowsAroundFrame(new_image, 1)
        scribus.setScaleImageToFrame(scaletoframe=1, proportional=1, name=new_image)
if __name__ == '__main__':
    # This script makes no sense without a document open
    if not scribus.haveDoc():
        scribus.messageBox('Scribus - Script Error', "No document open", scribus.ICON_WARNING, scribus.BUTTON_OK)
        sys.exit(1)
    # Disable redraws
    scribus.setRedraw(False)
    # Run the main script, ensuring redraws are re-enabled even if the
    # script aborts with an exception, and don't fail with an exception
    # even if the document is closed while the script runs.
    try:
        main(sys.argv)
    finally:
        try:
            scribus.setRedraw(True)
        except:
            pass

Here is the version using the Python Imaging Library. 

#!/usr/bin/env python
# -*- coding: utf-8  -*-

# ****************************************************************************
#  This program is free software; you can redistribute it and/or modify 
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# 
# ****************************************************************************


"""
(C) 2005 by Thomas R. Koll, <tomk32@gmx.de>, http://verlag.tomk32.de
(c) 2008 modifications, additional features by Gregory Pittman

A simple script for exact placement of a frame (infobox)
over the current textbox, asking the user for the width
of the infobox and in which column to place it.
Some enhancements:
* You can now create a text frame or an image frame, and also load
an image.
* More than one infobox can be added to a text frame
* Height and Y-Pos of top of infobox can be specified
* Works with any page unit - pts, mm, in, and picas
* Infobox has Text Flows Around Frame activated, also
  Scale Image to Frame for images

USAGE
Select a textframe, start the script and have phun
Default name for the infobox is 'infobox' + name_of_selected_frame,
but this can be changed.


"""

try:
    import scribus
except ImportError:
    print "Unable to import the 'scribus' module. This script will only run within"
    print "the Python interpreter embedded in Scribus. Try Script->Execute Script."
    sys.exit(1)

try:
    from PIL import Image
except ImportError:
    print "Unable to import the Python Imaging Library module."
    sys.exit(1)

def main(argv):
    unit = scribus.getUnit()
    units = ['pts','mm','inches','picas']
    unitlabel = units[unit]
    if scribus.selectionCount() == 0:
        scribus.messageBox('Scribus - Script Error',
            "There is no object selected.\nPlease select a text frame and try again.",
            scribus.ICON_WARNING, scribus.BUTTON_OK)
        sys.exit(2)
    if scribus.selectionCount() > 1:
        scribus.messageBox('Scribus - Script Error',
            "You have more than one object selected.\nPlease select one text frame and try again.",
            scribus.ICON_WARNING, scribus.BUTTON_OK)
        sys.exit(2)
    textbox = scribus.getSelectedObject()
    pageitems = scribus.getPageItems()
    boxcount = 1
    for item in pageitems:
        if (item[0] == textbox):
            if (item[1] != 4):
                scribus.messageBox('Scribus - Script Error', 
                          "This is not a textframe. Try again.", scribus.ICON_WARNING, scribus.BUTTON_OK)
                sys.exit(2)

# While we're finding out what kind of frame is selected, we'll also make sure we
# will come up with a unique name for our infobox frame - it's possible we may want
# more than one for a multicolumn frame.
        if (item[0] == ("infobox" + str(boxcount) + textbox)):
                boxcount += 1
    left, top = scribus.getPosition(textbox)
    o_width, o_height = scribus.getSize(textbox)
    o_cols = int(scribus.getColumns(textbox))
    o_gap = scribus.getColumnGap(textbox)
            
    columns_width = 1
    column_pos = 0
    o_colwidth = (o_width - ((o_cols - 1) * o_gap)) / o_cols
    if (o_cols > 1):
        while (columns_width > o_cols or columns_width < 1):
            columns_width = scribus.valueDialog('Width',
                                            'How many columns width shall the '+
                                            'box be (max ' + str(o_cols) + ')?')
            columns_width = int(columns_width)
        if (columns_width < o_cols):
            max = o_cols - columns_width
            while (column_pos <= max and column_pos <= 1):
                column_pos = scribus.valueDialog('Placement',
                                         'In which column do you want '
                                         'to place the box (1 to ' +
                                         str(o_cols) + ')?')
            column_pos = int(column_pos) - 1 
    new_height = 0
    while (new_height == 0):
        new_height = scribus.valueDialog('Height','Your frame height is '+ str(o_height) +
                                                 unitlabel +'. How tall\n do you want your ' +
                                                 'infobox to be in '+ unitlabel +'?\n If you load an image, height will be\n calculated, so the value here does not\n matter.', str(o_height))
    new_top = -1
    while (new_top < 0):
        new_top = scribus.valueDialog('Y-Pos','The top of your infobox is at '+ str(top) +
                                                 unitlabel +'. Where\n do you want  ' +
                                                 'the top to be in '+ unitlabel +'?', str(top))
    framename = scribus.valueDialog('Name of Frame','Name your frame or use this default name',"infobox" + str(boxcount) + textbox)
    frametype = 'text'
    frametype = scribus.valueDialog('Frame Type','Change to anything other\n than "text" for image frame.\nEnter "imageL" to also load an image',frametype)
    new_width = columns_width * o_colwidth + (columns_width-1) * o_gap
    new_left = left + ((column_pos) * o_colwidth) + ((column_pos) * o_gap)
    if (frametype == 'text'):
        new_textbox = scribus.createText(new_left, float(new_top), new_width, float(new_height),framename)
        scribus.setColumnGap(0, new_textbox)
        scribus.setColumns(1, new_textbox)
        scribus.textFlowsAroundFrame(new_textbox, 1)
    else:
        if (frametype == 'imageL'):
	    imageload = scribus.fileDialog('Load image','Images(*.jpg *.png *.tif *.JPG *.PNG *.jpeg *.JPEG *.TIF)',haspreview=1)
            im = Image.open(imageload)
            xsize, ysize = im.size
	    new_height = float(ysize)/float(xsize)*new_width
	    new_image = scribus.createImage(new_left, float(new_top), new_width, float(new_height),framename)
	    scribus.loadImage(imageload, new_image)
        else:
	    new_image = scribus.createImage(new_left, float(new_top), new_width, float(new_height),framename)
        scribus.textFlowsAroundFrame(new_image, 1)
        scribus.setScaleImageToFrame(scaletoframe=1, proportional=1, name=new_image)

if __name__ == '__main__':
    # This script makes no sense without a document open
    if not scribus.haveDoc():
        scribus.messageBox('Scribus - Script Error', "No document open", scribus.ICON_WARNING, scribus.BUTTON_OK)
        sys.exit(1)
    # Disable redraws
    scribus.setRedraw(False)
    # Run the main script, ensuring redraws are re-enabled even if the
    # script aborts with an exception, and don't fail with an exception
    # even if the document is closed while the script runs.
    try:
        main(sys.argv)
    finally:
        try:
            scribus.setRedraw(True)
        except:
            pass
Retrieved from "https://wiki.scribus.net/wiki/index.php?title=Infobox_in_column&oldid=33749"