Working with text frames

This article is part of the Tips & Tricks series.

Installation • Usage • PDF issues • Other

This article is intended to be a compilation/list of operations pertaining to text frames.

Creation

Create a text frame by:

1. Clicking the Text Frame icon on the toolbar
2. or select Insert > Text Frame from menu
3. Keyboard: T, or Alt+N, T.

This will enable your mouse to place and size the text frame: click-and-hold-down mouse button, then drag diagonally on the page. The click determines one corner of the frame, letting up the diagonally opposite corner. It may be more conventional to start with the upper-left hand corner, but you may start with any corner to its opposite.

Context Menu

Clicking with the right mouse button brings up the Context Menu, which contains several common frame operations, an important one of which is the ability to convert a Text Frame to another type of frame.

Size and Position

At this point you will find that the Properties window is an indispensible item for working with Scribus. If not already present, open it under the menu item Windows > Properties. The XYZ tab of the Properties window shows very precise information about the X,Y position of the upper left hand corner, the width and height of the frame, and the frame's rotation. Note that information is only displayed for a selected frame -- displayed as a dashed red border. A frame is automatically selected when created. Unselect a frame by clicking on the page outside its borders, select it again by clicking inside. A frame must be selected to be modified or repositioned.

Resizing, Repositioning

With the mouse:

1. Click-and-drag anywhere inside the frame to reposition. Frames may even be positioned off the page, or slid from one page to another (depending on Scribus version).
2. Click-and-drag any of the small red rectangles along the border to resize the frame.

With the Properties window:

There are three ways to change the individual settings --

1. editing with the keyboard
2. clicking on the up or down arrows to the right of each value
3. using the mousewheel on each setting -- usually hovering the cursor will be enough, if not, click on the value first

Also note that for 2 and 3, holding down Ctrl, Shift, or Ctrl+Shift will alter which decimal place is affected. In addition, when using the Properties window width and height are by default linked, but you need only click the chain icon to the right to unlink them.

Rotation

With the mouse:

Click the Rotate Item icon on the toolbar (keyboard: R), then click inside the frame and drag-rotate to desired angle.

With the Properties window:

Just like resizing and repositioning, you have the same three ways to change the rotation digitally. There is also an icon just below (looks something like one of a pair of dice) to alter the point around which rotation takes place -- center or one of the four corners.

Entering/Editing Text in the Frame

Story Editor

With a text frame selected, click the Story Editor icon on the toolbar (keyboard: Ctrl+Y). The Story Editor is the most efficient way to manually enter text. The text will display with the correct font color, but the font face and spacing will not be reflected in the Story Editor's display.

The many features of Story will be covered in detail elsewhere. For this brief introduction, note that a large array of text features are completely under your control in Story Editor, including font face, color, spacing, kerning, justification, and more. Note that changing a setting will only modify text that you have selected (highlighted) and any subsequently entered text.

Take the time to learn how to create and use Styles, which will save time when you are repetitively using a font with a specific set of features.

Editing from the main page

Click the Edit Contents of Frame icon on the toolbar (keyboard: E). When you click inside the frame, you will see a blinking vertical cursor where you may add or edit text. You may also select (highlight) text and change the highlighted text features in Properties > Text. As you can see the choices are analogous to those in the Story Editor.

Editing All the text in the frame

If not already selected, click the Select item icon on the toolbar (keyboard: C | note that if you are in edit text mode, pressing C will enter text in the frame). Now select the frame whose text you wish to edit. At this point if you make changes in Properties > Text, all text in the frame will be modified.

Loading Text from a File

Load text from a file from the Context Menu (right click in frame) > Get Text, or from the menu File > Import > Get Text. You may also Append Text (Get Text will replace whatever is already in the frame). You may also load a file into Story Editor.

Levels & Layers

Frames in general, not just text frames, represent a two-dimensional space that you manipulate and move around your workspace, much like a small note you can attach and detach. Like small physical notes, they are laid down, one by one, on the page, new ones on a layer over the previous ones. The small box labeled Level in the XYZ tab of Properties allows you to move the selected frame up or down layers; the arrows with bars will move all the way to the top or bottom. Since the background of your frame may be opaque or transparent, the level the frame is at will affect how much of the frame can be visible in relationship to other overlapping or underlying frames.

XYZ Tab: The Rest

The remaining buttons in the XYZ tab do the following:

1. Flip the selected frame horizontally or vertically

1. Lock a frame in place

1. Lock the size of the frame only

1. Enable/disable printing of the frame. Why? You may want to have a frame on the page that's a message to yourself or someone else, yet not be part of the printed finished work. Or the frame may just be a space-saver for some other purpose.

Shape and Frames

Let's start with the Shape tab in Properties. Near the top is a button with a square in the center. If you click that button, you may quickly switch to one of a group of set shapes from your original rectangle. In addition, if you click Edit Shape, you now have full vector-editing control of your shape.

Another angle on shapes and text frames:

You may also use the Polygon tool on the toolbar (use will be described in detail in another section) to create a regular polygon, which may then be converted using the Context Menu (right-click in the polygon) to Convert To > Text Frame. Note that before you enter text, you may want to change the background color of the frame.