Building SVN versions with CMake

This article needs to be cleaned up. Please update the information, remove factual errors, refresh category data, or correct the hyperlinks.

This page tries to describe how to build Scribus from source. The instructions mainly refer to building Scribus on Linux. Building on Mac OS and on Windows is not easy; you can find some explanations for Mac OS here, and for Windows here.

TL;DR (Too Long; Didn't Read)

You know what you are doing already and just want to compile Scribus via SVN, skip the introduction and go to Installing 1.5svn

Why would I Need or Want to 'Build' Scribus?

1. For Necessity: You are using the current stable version, but certain bugs are a problem, and you know they have been fixed since the last release.
2. For Science: You have heard about some new features in the development version, and you'd like to try them out.
3. For the World: You're considering helping out the Scribus project and want to see how it's put together to get some idea about how you can help.

'Or, for that matter, what is this 'Building' you speak of?

Expand this content if you need a little bit more background on what Building source code means. --->

When you are going to build or compile Scribus, what you have downloaded (if you have downloaded the source code) is a large collection of plain-text files (ending in '.c' or '.cpp' to denote either the C or C++ programming language respectively). The reason there are so many is that this actually makes the process of developing software easier, and allows for use of small parts repeatedly by different functions of the overall program. These plain-text files need to be converted to binary files (ending in ',o' for object files) so that your computer can use them, and the program works efficiently.

The first step is to configure your downloaded directory of files. This requires a check of your computer to make sure the compiling programs and all the other required outside resources are present and sufficiently up-to-date. Just as Scribus itself consists of these small program files, it also will use those of outside programs, like CUPS, lcms, and so on, so it needs to have on hand those plain text files to connect to these outside resources. After checking for the necessary resources, a script is being written to tell the compiler how to go about building Scribus. The process will fail if you are missing something, and cmake will give you error messages.

The Scribus Team requires the use of CMake for this configuring process. It is quick, easy to use, and easy for the developers to write for – even CMake needs instructions. You can also pass to CMake several special parameters for your particular Computer setup, for example, where you want Scribus to be installed.

Next, the actual 'build' process is done with a program called make. To start the process you simply enter make in a command line. That's it. You do not need to have root privileges to compile, and it is generally recommended that do not compile as root (one reason for this is that, by creating a number of files under root's name, you then interfere with subsequent updating from SVN). Compiling takes up a good part of your computer's resources, especially your processor(s), so you will find its performance rather sluggish while compiling is going on. Consequently, many find that compiling is best done by starting make and then walking away from the PC to let it do its work.

Finally, you need to install, done with the command make install. If you are going to install in the default location, you will need to have root privileges. On most Linux distros this can easily be done with the su command (after which you need root's password), or with sudo, entered as sudo make install. You can run cmake with a command that can install Scribus in a directory for which you have write privileges, and therefore do not need to be root.

For this help, and other advice, continue reading the following sections.

Fear is the mind Killer...

"Do not fear building Scribus from source" ~Paul Muad'dib Atreides

There is nothing to fear here, building Scribus yourself is not as hard as it sounds. You will not break your computer.

This page can teach a beginner many things at once: starting with beginning to comprehend the internals of Scribus to appreciating the Command Line shell and how to invoke commands through it. Learn how to install software libraries (components that Scribus utilizes) and go so far as to modify source code through applying patches. This exposure will help increase your skill set to work on most all platforms and widen your knowledge of software creation and maintenance.

1st: Download latest snapshot with Subversion

Subversion is the versioning control system used for Scribus. This allows multiple developers to hack on Scribus source code simultaneously. Check the Subversion page for further details on how to use this tool. Make sure you have svn installed. You don't need to learn all subversion commands and options: "svn co" and "svn up" might suffice, see below for examples.

You should create a directory in which the Scribus source code will be downloaded. Then change to that directory, and once you are there, you can download the source code with a simple command. You have to choose which branch you will download, as shown in the table below:

Status	Version		SVN Path	Command to download from SVN
Development	1.5.x		/trunk/Scribus	svn co svn://scribus.net/trunk/Scribus scribus15
Development Snapshot	1.5.0		/trunk/Scribus revision 20099	svn co -r 20099 svn://scribus.net/trunk/Scribus scribus150
Stable	1.4.x		/branches/Version14x/Scribus	svn co svn://scribus.net/branches/Version14x/Scribus scribus14x
Outdated	v.1.3.3x		/branches/Version133x/Scribus	svn co svn://scribus.net/branches/Version13x/Scribus scribus13x

Important Notes:

• All subversion URLs for Scribus anonsvn are based at: svn://scribus.net/
• Updating your working copy is much the same as cvs - just cd into your working copy and run "svn up".
• There's also http://scribus.net/svn/Scribus/ , which gets you to the same content, but svn://scribus.net/ is usually faster. HTTP access might be useful to those behind paranoid firewalls or proxies.
• If you used to check out -r <Version>, check out <SVN Path> instead

---

Thanks to Anduin.net, anonymous SVN access is updated daily.

Example

Here is an example of the commands for downloading the source code:

(This example is for Linux; on other platforms you should use the corresponding commands)

Let's suppose that you want to download the Scribus 1.5.0. source code in a directory called "scribussource" under your home directory. Here are the commands:

 mkdir ~/scribussource
 cd ~/scribussource
 svn co svn://scribus.net/trunk/Scribus

When subversion finishes downloading, you will find the source code in ~/scribussource/Scribus

If you have the source code and you want to update it to the latest version:

 cd ~/scribussource/Scribus
 svn up

2nd: Install methods: Package Manager, Source, Out-of-Source Build

Essential tools

Before going further, we must understand that in order for anything to get built, tools need to exist. In modern OS's especially Linux many of these are build tools arrive already bundled. If they aren't for some reason you will need to install them manually (see package manager)

• gcc
• gcc-c++
• cmake (version ≥ 2.8.9)

• subversion – if you're going to compile, you might as well get the latest Scribus updates

There are several option for installation.

• Package Manager: (difficulty: easy) Does a lot of the heavy lifiting by installing all the components you specify
• Build from Source: (difficulty: intermediate to advanced) Build it the old fashion way
• Out-of-Source-Builds: (difficulty: intermediate) Needs explanation

Package Managers

Note: many Linux distros have their own Package Managers i.e. Debian has apt, Fedora and Centos have yum, Redhat uses rpm etc... On Mac OS X there are several choices, most popular are Macports and Homebrew. In general, by utilizing the installed package manager we can streamline the installations through easy one liners which will automate the install. We do this by invoking the following pattern:

(package-manager) install (software-or-library-package-name)

Debian;    apt-get install cmake
Fedora:    yum install cmake
MacOSX: brew install cmake

Specific Dependencies

Dependencies are considered to be 3rd party software libraries or other altogether unique software projects that are have components that are needed to build a specific project from. When we want to build Scribus we need to make sure that we have all the dependencies fulfilled or else it will complain to us about missing components or obsolete ones. The following section assumes you need to manually install dependencies. Here are the list of package names that will be needed to be installed before attempting to build Scribus. Each major version of Scribus will require different dependencies.

Version 1.5.x

Here is a list of dependencies for Scribus 1.5.x:

 Qt (version >= 5.2; see below for details)
 Cairo
 Pixman
 Boost
 Cups (not required on Windows)
 Fontconfig (not required on Windows)
 Freetype
 Libhunspell (if missing, spellchecker won't work)
 Libjpeg
 Libtiff
 Libxml2
 LittleCMS (version >= 2.1)
 Pkgconfig (Linux)
 PoDoFo
 Poppler and Poppler data
 Python 2.7
 Python-Pillow
 Tk and Tkinter (required by some scripts shipped with Scribus)

For Scribus 1.5.3+

 Harfbuzz
 ICU (UC module)
 Qt 5.5+

On Linux, for each item you have to install both the main package and the development package (for example: cairo and cairo-devel, pixman and pixman-devel, and so on). Some packages should be already installed (for example, Cairo or CUPS).

Getting and installing Qt5

Starting with rev. 19790 (4 February 2015), Qt 5.2 or later is required.

If Qt5 is not present on your system, you have to install or build it.

You can download Qt5 from http://qt-project.org/downloads. Binary installers are available for Windows, Mac OS X and Linux. For Linux, if your distribution provides the latest Qt5, you can install it from its repositories (details for some distributions are listed below).

Also available is the source code, in case you want to build Qt5 yourself, or if an installer is not available for your operating system.

If you're using the Qt installer on Linux, make sure to make the file qt-opensource-linux-x**-5.*.*.run executable. You can do this via your chosen UI or the command line. The latter requires the following commands:

chmode +x /path/to/qt-opensource-linux-x**-5.*.*.run

To start the installation process, use the cd command to move into the installer's directory.

Next, run the following command:

./qt-opensource-linux-x**-5.*.*.run

If run without root privileges, the installer will suggest /home/username/Qt5.* as the installation directory. That's fine if you only want to test Scribus 1.5.x. If you also want to test the latest versions of other programmes using Qt5, you should install Qt5 with root privileges.

If you have Qt4 and Qt5 installed, and/or cmake does not find Qt5, you need to specify its location with the build option -DQT_PREFIX="path-to-Qt5" (for example: -DQT_PREFIX="/home/user/Qt/5.1.1/gcc/")

In case you need a list, the required qt5 libs are :

 Qt5Core
 Qt5Widgets
 Qt5Gui
 Qt5Xml
 Qt5WebKit
 Qt5WebKitWidgets
 Qt5Network
 Qt5OpenGL
 Qt5LinguistTools
 Qt5Quick
 Qt5PrintSupport

In case you got problems, Pygmee suggests too : "it build here after i've build sigil where it make a bit changes in QT5 config".

Debian

On Debian Testing, on top of the packages pulled in by apt-get build-dep you need. ---->

sudo apt-get install libqt5webkit5-dev qtquick1-5-dev qtdeclarative5-dev \
                     qttools5-dev-tools qttools5-dev liblcms2-dev

Note 1: They are all available in the official Debian repositories.
Note 2: This list should also apply for the latest Ubuntu release.

Fedora 19 and later

Fedora 19 and later have Qt5 packages available from their repositories. The requirements seem to be ---->

yum install qt5-qtbase qt5-qtbase-devel qt5-qtdeclarative qt5-qtdeclarative-devel qt5-qttools \
            qt5-qttools-devel qt5-qtwebkit qt5-qtwebkit-devel qt5-qtbase-static

The above list will bring in qt5-qtbase-gui and possibly some other packages as dependencies. You might need also to install glibc-headers.

Ubuntu

Firstly, if you are running Ubuntu with version < 15.10, upgrade. As of Scribus 1.5.2, Qt 5.3 and cairo 1.14 are required.

Ubuntu v13.04 ---->

• Initially install:

sudo apt-get install qt5-default qttools5-dev-tools libqt5location5 libqt5webkit5-dev libqt5webkit5 \
                     qt5-qmake libqt5xml5 libqt5gui5 libqt5core5 qttools5-dev qttools5

• Then, specifically relating to qt5, install:

sudo apt-get install libqt5declarative5-dev qtlocation5-dev qtsensors5-dev 

• Install the usual libs not related to qt5 :

sudo apt-get install zlib1g-dev libpng12-dev libjpeg-dev libtiff5-dev libpython-all-dev \
                     libfreetype6-dev libcairo2-dev libcups2-dev libxml++2.6-dev liblcms2-dev

Ubuntu v13.10 ---->

Almost the same as 13.04 except no qttools5 and no libqt5declarative5-dev instead use qtdeclarative5-dev

sudo apt-get install qt5-default qttools5-dev-tools libqt5location5 libqt5webkit5-dev libqt5webkit5 \
                     qt5-qmake libqt5xml5 libqt5gui5 libqt5core5 qttools5-dev
sudo apt-get install qtdeclarative5-dev qtlocation5-dev qtsensors5-dev
sudo apt-get install zlib1g-dev libpng12-dev libjpeg-dev libtiff5-dev libpython-all-dev \
                     libfreetype6-dev libcairo2-dev libcups2-dev libxml++2.6-dev liblcms2-dev

1. Note 1: There are bugs with qt5 version 5.0.2. Install qt5 version 5.2 with the installer found on https://qt-project.org/downloads.
2. Note 2: (JLuc, 25 May 2014): I followed this procedure step by step and everything when right out of the box.
3. Note 3 (unknown author) : In addition, I had to install: libgl1-mesa-dev and dependencies.

Ubuntu v14.04 ---->

This is how i compiles scribus 1.5 on a quite freshly installed Ubuntu 14.04  :

1. Install scribus 1.5 out of the scribus friend's PPA (https://launchpad.net/~scribus/+archive/ubuntu/ppa). There are too many keyboard management bugs with this version, but it maybe installs some usefull libraries. Then uninstall it.
2. Install cmake, g++ and subversion in case there are not there allready ("sudo apt-get install cmake" and "sudo apt-get install subversion")
3. Install (using synaptics or sudo apt-get) the following libraries and their dependancies : libdrm-dev, libgl1-mesa-dev, libxml2-dev, libzip-dev, libfreetype6-dev, liblcms2-dev, libpodofo-dev, libcairo2-dev, libmagick++dev (maybe useless), libgraphicsmagick++1-dev, libcups2-dev, libpython2.7-dev, libpoppler-qt5-dev (maybe useless), libpoppler-cpp-dev, libpoppler-private-dev, libhunspell-dev
4. Compile using maksvn script (https://github.com/JLuc/makscribus/blob/master/maksvn).

That's it !

OpenSuse

Firstly, if you are running OpenSUSE with version < 13.2, upgrade. As of Scribus 1.5.2, Qt 5.3 and cairo 1.14 are required.

13.2 or newer ---->

• Install the OS
• install Qt5 - sudo zypper in -t devel_qt5
• Install these packages via Yast2 or 'zypper in' from the command line:

python-devel cairo-devel hunspell-devel cmake subversion cups-devel libtiff-devel liblcms2-devel cups-devel boost-devel libjpeg8-devel libtiff-devel libpodofo-devel libpoppler-devel librevenge-devel libcdr-devel libmspub-devel libvisio-devel libfreehand-devel

• Proceed with Scribus compilation process.

Windows

Please refer to Building_SVN_versions_on_Windows

Mac OSX

MacPorts (recommended by Scribus core-devs) ---->

Needs details

Homebrew Package Manager (Scribus community supported effort) ---->

FYI, please don't post homebrew bugs on the bugtracker. Instead read the top notice on Scribus_and_Homebrew.

1. brew tap scribusproject/scribus
2. brew install --HEAD scribus --verbose
3. brew linkapps --local scribus
4. Invoke with: ~/Applications/Scribus.app/Contents/MacOS/Scribus

Additional dependencies for some graphics formats

In 1.5.0+, there are a number of vector and bitmap graphics formats which can now be imported into Scribus. Some of these have particular additional dependencies.

GraphicsMagick (Optional)

You do not need GraphicsMagick to run cmake or compile 1.5.0svn, but some added import filters will be available if you have it (and cmake will detect it automatically). What Scribus needs are the following packages: graphicsmagick, graphicsmagick-devel, graphicsmagick-c++, and graphicsmagick-c++-devel.

OpenSceneGraph (Optional)

This may be available with your Linux distribution (definitely for Fedora 17 and later). You can also download and compile yourself.

Fedora

sudo yum install OpenSceneGraph OpenSceneGraph-devel

should be enough, and will get you the additional requirements of Inventor, OpenThreads, and OpenThreads-devel.

OpenSUSE

go to http://software.opensuse.org/package/OpenSceneGraph and use the 1-click install procedure.

MS Publisher and WPG Importers

To build Scribus with support for MS Publisher and WPG files, you need libmspub, as well as libwpg and libwpd. Note that the minimum version for PUB import is libmspub 0.0.6, and also that you want the development packages (libwpd-devel, libwpg-devel, libmspub-devel, for example in Fedora).

Update (June 2014): Scribus is now able to import MS Publisher, MS Visio and CorelDraw documents via librevenge. See this page for details.

Scribus 1.4.x

Warning:

Please update this section

qt4 
qt4-devel
qtwebkit-devel
poppler-devel              (on debian you might need poppler-private-dev too : see http://bugs.scribus.net/view.php?id=11162)
podofo-devel
ghostscript                   (this should already be bundled)
pkgconfig
lcms2-devel
libjpeg-devel
libtiff-devel
cups-devel
libxml2 and libxml2-devel (libxml2 should already be bundled)
python
python-devel
fontconfig-devel
openssl-devel               (?)
freetype
freetype-devel
python-pillow-devel  (formerly python-imaging-devel)
tk 
tkinter
hunspell 
hunspell-devel              (as of 1.4.2)
cairo                             (cairo should already be bundled)
cairo-devel 
boost-devel

For convenience, here is the above list listed all on the same line ---->

apt-get install qt4 qt4-devel qtwebkit-devel poppler-devel podofo-devel ghostscript pkgconfig lcms2-devel libjpeg-devel libtiff-devel cups-devel libxml2 libxml2-devel python python-devel fontconfig-devel openssl-devel freetype freetype-devel python-pillow-devel tk tkinter hunspell hunspell-devel cairo cairo-devel boost-devel

In addition to the above each Linux distrubution has it's own quirks to be aware of. The subsections below work to address them:

Fedora

Warning:

Please update this section

For Fedora at least, the names are as used with yum, for example:

yum install qt-devel lcms-devel libjpeg-devel libtiff-devel

and so on. On other distros the exact names may vary.

On Fedora, if you install various development packages, you have most of what you need. Exceptions seem to be cups-devel, lcms-devel, tk and tkinter, and python-imaging-devel (maybe cairo-devel). Incidentally, in Fedora 9 and later, Qt4 is loaded by default, and is labeled only qt and qt-devel.

Packages for Ubuntu

Warning:

Please update this section

To install all the required libraries and packages for Debian or Ubuntu type the following in a terminal:

sudo apt-get build-dep scribus-ng

In March 2011 the build dependencies for Scribus 1.4.0 on Debian/Ubuntu were:

debhelper (>= 7), cmake (>= 2.4.3), gcc (>=3.3.5), libqt4-dev (>= 4.6), libcairo2-dev, zlib1g-dev,
liblcms1-dev (>= 1.13), libtiff4-dev, libcups2-dev,libxml2-dev (>= 2.6.16), gettext, python-all-dev,
libboost-python-dev, libaspell-dev, libpodofo-dev (>= 0.8.4), quilt

Here is a link describing the particulars for Ubuntu 7.10 (Gutsy Gibbon).

The easy way for Debian users

Warning:

Please update this section

On Debian, if you install the develeopment packages as described above(apt-get build-dep scribus-ng) you will need the following packages to build the trunk (status September 2011):

• libqtwebkit-dev
• poppler-private-dev may be needed, see 11162

If you're using Debian (or Ubuntu) you need to manually compile the SVN version, only if you want to be really really up to date.

Otherwise, you can rely on the .deb for scribus-ng in our own repositories or, if you don't find the packages for your platform (ppc for instance) you can let apt-get compile from source using the latest sources in the repositories (most of the time those will be older than the SVN ones, but you probably don't really care).

You first have to add the source line for deb-src in synaptic, then you should become root (sudo -i) and:

apt-get source scribus-ng;
cd scribus-ng-1.3.5.dfsg~svn20090208;
apt-get build-dep scribus-ng;
debuild -us -uc; dpkg -i 
../scribus-ng_1.3.5.dfsg~svn20090208-3_i386.deb

For more information on using Scribus with debian, please have a look at the Debian page our offical site

Build from Source

Moved from top of the page..being integrated Kunda (talk) 15:07, 29 June 2014 (CEST)
If you are compiling for the first time, don't be scared of the command line. Just copy the lines relevant to the version of Scribus you want to use, one by one on the command line.

Watch out: * Newbies should take care, that only 'make install' part has to be done as a root. Rest of the part, like downloading and compiling can be done easily as a normal users.
You can install as a user, however, if you are installing into a directory you have write permission for. See the -DCMAKE_INSTALL_PREFIX command below. * And if you already have a version of Scribus on your system, don't forget to use the option WANT_VERSIONING=1. You can specify this option as -DWANT_VERSIONING=1.

---

Take as an example this following set of commands which are geared towards the Linux environment. Here we see a case in which there is a downloading of the Scribus development version (1.5, not yet stable), building it and then installing it. Note that this assumes that the environment has been prepared previously with all the dependencies installed.

Recently moved from top of page. Still fine tuning how to represent this.

Warning:

You must have CMake version ≥ 2.8.9 (Older versions will fail). See: Official:Compile with CMake

mkdir ~/src/
mkdir ~/src/scribus_svn
sudo mkdir /usr/local/scribus_svn
cd ~/src/scribus_svn
svn co svn://scribus.net/trunk/Scribus
cd ./Scribus
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/scribus_svn ..
make
sudo make install

Note:

• you may change ~/src/ to wherever you want to put your source into.
• you may change /usr/local/scribus_svn/ to wherever you want to put the Scribus binaries.
• in case you want to install the 1.4 stable version, replace the "svn" instruction with following : svn co svn://scribus.net/branches/Version14x/Scribus

End of subsection

Start the Build Process

Before continuing, please note that an out-of-source build is recommended, however.. From the Scribus directory:

/path/to/cmake . -DCMAKE_INSTALL_PREFIX:PATH=/path/to/install/to/scribuscmake/

For example:

/usr/local/bin/cmake . -DCMAKE_INSTALL_PREFIX:PATH=/opt/scribus15svn

Some options that the Scribus CMake files know about (more can be found here : http://wiki.scribus.net/canvas/CMake_Build_Options):

• -DWANT_VERSIONING=1: Sets the build to use the VERSION setting as a suffix for the install directories and the binary. Eg, the binary could be scribus-1.3.5svn. This should mean that you can install multiple versions with the same prefix with no clashes.
• -DWANT_DEBUG=1: Sets the build to be a debug release and use -O0 -g3, instead of -O2 (This is the default for now, and cannot be turned off unless you edit the CMakeFiles.txt file).
• -DWANT_CAIRO=1: Makes CMake search for cairo and build with cairo instead of LibArt_LGPL. cairo is the primary supported option for 1.3.5+. (DEPRECATED)
• -DWANT_LIBART=1 (not available in 1.3.5, default in 1.3.3.x): Makes CMake search for and build with LibArt_LGPL instead of cairo.
• -DWANT_QTARTHUR=1: In 1.3.5, uses the QT4 ARTHUR rendering library. This is an alternative to CAIRO.
• -DWANT_HUNSPELL=1: This will enable the new (as of 1.4.2) hunspell-based spell checking capabilities across *all* platforms.

If you have several version of QT installed or QT is installed in a non standard location you'll have to tell cmake where to find it by setting -DQT_QMAKE_EXECUTABLE

For example: to make a cairo debug build, then something like this:

/usr/local/bin/cmake . -DCMAKE_INSTALL_PREFIX:PATH=/opt/scribus134cvs -DWANT_CAIRO=1 -DWANT_DEBUG=1 -DWANT_VERSIONING=1

To use qt_arthur instead:

/usr/local/bin/cmake . -DCMAKE_INSTALL_PREFIX:PATH=/opt/scribus134cvs -DWANT_QTARTHUR=1 -DWANT_DEBUG=1 -DWANT_VERSIONING=1

Out-of-Source-Builds

One of the advantages of CMake is that you can do an out-of-source build. What is this? It enables you to build the application without writing anything at all to the directory where the Scribus source is. This means your source tree is clean, always. Its easier and faster to update, and you can build multiple targets out-of-source from the same source tree. Cool!

To do an out-of-source build, you need a new directory to build in. Say you have the source files in:

/home/username/scribuscmake/Scribus

Make the following directory:

/home/username/scribuscmake/builddir

So then, instead of doing:

cmake . -DCMAKE_INSTALL_PREFIX:PATH=/opt/scribus15svn

you would then change to the builddir directory and run:

cmake ../Scribus -DCMAKE_INSTALL_PREFIX:PATH=/opt/scribus15svn

Simple!

More CMake Options

CMake_Build_Options

Continuing on to the build stage

Once this has successfully completed, simply run make && make install.

The CMake based build system is very new to Scribus and it will change and it will need improving. Please report issues on our mailing list or bugtracker.

There is a long todo list for this build system including, but not limited to:

• Checking it works across distributions
• Checking it works across various flavours of UNIX
• Checking it works on 64 bit distros
• Add Win32 and Mac OSX support

Making a tarball for distribution

To make a tarball for distribution, the old way would be to make dist. The new way is to run make package_source or /path/to/cpack -G TBZ2 --config CPackSourceConfig.cmake to give you a bundle of the source. With cmake 2.4.1 there is only support for a gzip tar.gz however a bzip2 tar.bz2 is possible with later versions of cmake.

Notes For Packagers

If you package Scribus for a distribution keep in mind the issue of the install prefix versus temporary install directory prefix. The following seems to work well for Debian packaging:

>_______mkdir -p $(BUILD_DIR)

>_______cd $(BUILD_DIR) && $(CMAKE) \
>_______    -DWANT_DEBUG:STRING=$(DEBUG_FLAG) \
>_______    -DCMAKE_INSTALL_PREFIX:PATH=/usr \
>_______    -DCMAKE_SKIP_RPATH:BOOL=1 \
>_______    -DRPATH_STYLE:STRING=none \
>_______    -DWANT_VERSIONING:BOOL=1 \
>_______    -DCUSTOM_VERSIONTAG:STRING=-ng \
>_______    -DCMAKE_CXX_FLAGS:STRING='-o2 -g -Wall' \
>_______    -DCMAKE_C_FLAGS:STRING='-o2 -g -Wall' ../../

then

>_______$(MAKE) -C $(BUILD_DIR) install DESTDIR=$(INSTALL_DIR)

where $(BUILD_DIR) is ./build and $(INSTALL_DIR) is ./install

Using $(PREFIX) is the key to avoiding hardcoded absolute path problem.

=

TODO

• Enable more pkg-config usage
• Prefixes for more packages